null
Categories
Brands
Navigate

DARKGLASS VINTAGE ULTRA v2 AUX-IN

Brand :

Write a Review
$499.99
SKU:
NUE-DARKGLASS-VINTAGE-ULTRA-V2
UPC:
6430054580465
Condition:
New
Shipping:
Free Shipping
DARKGLASS VINTAGE ULTRA v2 AUX-IN
View Details

DARKGLASS ELECTRONICS VINTAGE ULTRA v2 (AUX-IN) 

Vintage Ultra with Aux In

The Vintage Ultra is our tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.

  • Four band equalizer with six selectable mid frequencies
  • XLR output with switchable cab sim
  • Headphone output with IR cab sim
  • Dedicated footswitch to engage the overdrive section independently
  • Master volume to control the overall unit level
  • Attack and Grunt toggle switches to control the high and low frequency saturation
  • Aux In jack to practice with backing tracks

Vintage Reborn

The Microtubes B7K Ultra with Aux In features the warm, tube-like tones of the Vintage Microtubes and adds all the features a player will need for even greater versatility. Designed for both studio and live use, it will take your direct sound to a whole new level. It allows you to create and tailor your tone to perfection, from crisp, punchy, clean preamp to a tasty, saturated tone, and everything in between. This is a true elixir for low-end lovers. Now with an Aux In jack to help you practice with backing tracks.

Front Features

Master
Whereas the Level Knob controls the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI level control.
Blend
Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.
Level
Sets the volume of the overdriven signal.
Drive
Sets the amount of saturation in the overdriven signal.
Attack Switch
Sets the amount of treble content to saturate: The “Boost” setting emphasizes the treble content extra clarity and presence. The “Flat” position leaves this register untouched while the “Cut” position will reduce the amount of high frequencies being saturated.
Grunt Switch
Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.
Bass
+-12dB @ 100Hz
Lo Mids
+-12dB switchable 250Hz, 500Hz and 1kHz
Hi Mids
+-12dB switchable 750Hz, 1.5KHz and 3kHz
Treble
+-12dB @ 5kHz
Dimensions
Width: 125 mm / 5″
Length: 96 mm/ 3¾″
Height: 57 mm / 2¼″
Weight: 430 g / 0.95 lb
 

 

Inputs and Outputs

Input

  • Connect your instrument or output from your pedal board to the ¼” mono jack.

Aux In

  • This 3.5mm stereo input allows you to practice with backing tracks from e.g. your smartphone or laptop. Auxiliary input can only be used with the headphone output.
  • The pedal does not control the level, it must be set from your audio source. Remember to always first set the level low before connecting anything to the aux in!

Headphone Output

  • B7K Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.

9V DC

  • Only use a regulated 9V DC adapter with a center-negative plug

Output

  • Connect from the ¼” Output jack to the input of your amplifier or another effects pedal.

Direct Output

  • Balanced XLR output for connecting the pedal to a microphone preamp, PA system etc.

Ground Lift

  • Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.

Cab Sim

  • Toggle the cabinet simulation on/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.

USB

  • A Micro USB B connector allows you to connect the pedal to PC/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.

Related Products