ROLLS RPL108 POWER CONDITIONER - WITH RACK LAMPS!

FEATURES:

• Eight switched AC outlets
• Two light modules

Dimmer to adjust light modules brightness

Adjustable swivel and pull-out positioning The RPL108 protects your delicate electronic equipment by combining a high voltage varistor (MOV) surge and transient suppressor with an RFI/ EMI interference filter. The fast-acting suppression circuit responds in less than a nanosecond, clamping transient voltages to safe levels. The filter works to prevent noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of “electronic pollution" from contaminating the AC line and from there, leaking into sensitive audio, video, or computer circuits.

LAMPS
The RPL108 lamps pull out easily and may be aimed to provide the best illumination for your equipment. Each lamp is supplied with a 7 watt nightlight bulb. Replacements are readily available at most hardware stores, or wherever household lightbulbs are sold.


POWER SWITCHES
The RPL108 has a master POWER switch for the rear outlets as well as the lights. This switch glows when the unit is on.
To turn on the lamps, switch the RACK LIGHTS switch to the ON position, and adjust the DIMMER control for the desired brightness. The lights do not turn off automatically when the tubes are pushed in, so be sure to switch the RACK LIGHTS switch to the OFF position before pushing in the tubes.