Loading... Please wait...

Categories

  • Image 1

NEW MAGNATONE VARSITY REVERB - 1X12 COMBO

$1,999.00

Product Description

The Varsity is quickly becoming a favorite for gigging guitarists all over the planet (ask Jeff Beck about his). Now there’s an even more versatile option – The Varsity Reverb. Same specs and great tone.

Features :
Push-pull 15 watt amplifier powered by EL84s
Equally at home on the stage, studio or bedroom
This popular tube is bright and lively full of color and harmonics
The dual 12AX7s in the preamp provide a classic American tone
Tube Driven 4 Counterwound Springs Long Pan Reverb

FEATURES :
Vintage brown and gold cosmetic.
Push-pull 15 watt amplifier powered by EL84s.
This popular tube is bright and lively, full of color and harmonics.
The dual 12AX7s in the preamp provide a classic American tone.
Tube driven full length Accutronics spring reverb. • A sound much bigger then the power rating!
Equally at home on the stage, studio or bedroom

FRONT PANEL CONTROLS :

INPUTS
Input 1 : High Sensitivity
Use this input for max pickup output and frequency response.
Input 2 : Low Sensitivity (6dB)
Use this input for hotter pickups / lower gain.

VOLUME
Controls overall gain/volume. Typically, breakup will begin to occur around 6-7 on the dial. Higher setting may require less bass.

TREBLE
Controls high frequency response centered around 2Khz.

BASS
Controls low frequency response centered around 60hz.

REVERB
Controls the amount of reverberation effect. The drive and recovery circuits have been optimized for a smooth reverb decay.

FEEDBACK SWITCH
Activates the negative feedback loop. Reduces overall power amp gain and will alter the “feel” of the amplifier.
NOTE: Leave this switch in the “off” position when using the footswitch.

FOOTSWITCH
Feedback boost and Reverb can be controlled by the supplied 2 button footswitch and T/R/S cable.

REMOTE SPEAKER
External 8 Ohm speakers connect here. Note that internal speakers remain live.

LINE OUT
Line level outputs. Speaker response compensated for DI use. Always maintain a speaker load while using the line output.

STANDBY SWITCH
Allow the amplifier 1 minute to warm up before engaging. Use the standby switch during short breaks to increase tube life.

POWER SWITCH
Turns the amplifier on and off.
Make sure you are plugged into a proper grounded outlet.

FUSE
Always replace with same type and rating. 100-120V ~ 50/60HZ T2AL 250V 220-240V ~ 50/60HZ T1AL 250V


Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
Condition:
New