Loading... Please wait...

Categories

  • Image 1
  • Image 2

NEW MAGNATONE Panoramic Stereo - 2X10 COMBO

$2,799.00

Product Description

Clothed in the vintage brown and gold cosmetic, the Panoramic Stereo brings the Magnatone stereo experience to a smaller, more convenient size. Two 10” speakers are powered by four EL84s push pull 12 + 12 watts of all tube stereo power for a very compact and wide sounding amplifier.

All of this plus Magnatone’s exclusive Varistor Pitch Shifting Vibrato and a full length Accutroics reverb tank means you can get the sound of a Twilighter Stereo in the perfect size for grab and go gigs or rehearsals.

Features :
Vintage brown and gold cosmetic
2x10" speakers or head powered by (4) EL84s
12+12 watts all tube stereo power amp
Varistor Pitch Shifting Vibrato for True Dimensional Sound™ (switchable to tremolo)
Full length Accutronics™ reverb tank
Compact size for easy portability

FRONT PANEL CONTROLS :

INPUTS
Input 1 : High Sensitivity
Use this input for max pickup output and frequency response.
Input 2 : Low Sensitivity (6dB)
Use this input for hotter pickups / lower gain.

VOLUME
Controls overall gain/volume. Typically, breakup will begin to occur around 6-7 on the dial. Higher setting may require less bass.

TREBLE
Controls high frequency response centered around 2Khz.

BASS
Controls low frequency response centered around 60hz.

REVERB
Controls the amount of reverberation effect. The drive and recovery circuits have been optimized for a smooth reverb decay.

FM/AM SWITCH
Controls whether the effect is exclusive Magnatone pitchshifting vibrato (FM) or conventional tremolo (AM).
AM- Amplitude Modulation / tremolo
FM-  Frequency Modulation / vibrato

REMOTE PEDAL
Connect the optional Magnatone remote pedal here. Use any 1/4” mono or stereo guitar cable. When connected, the front panel speed control is disabled. The remote pedal works with both FM and AM settings.

SPEED
Controls the rate or speed of the selected effect. The exclusive Magnatone design allows for extremely slow “choral” settings not attainable from the original design. When the remote pedal is connected, the front panel control is inactive.

REMOTE SPEAKERS
External 8 Ohm left and right speakers connect here. Note that internal speakers remain live.

LINE OUT
Line level outputs. Speaker response compensated for DI use. Always maintain a speaker load while using the line output.

STANDBY SWITCH
Allow the amplifier 1 minute to warm up before engaging.

POWER SWITCH
Turns the amplifier on and off. Make sure you are plugged into a proper grounded outlet.

FUSE
Always replace with same type and rating.
100-120V ~ 50/60HZ T2AL 250V
220-240V ~ 50/60HZ T1AL 250V


Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
Condition:
New