Loading... Please wait...


  • Image 1
  • Image 2

Meris Ottobit 500 Series 440 Mic Preamp


Product Description


Install Meris 440 Mic Preamp into your 500 series lunchbox and connect your post effects pedals to the loop. Your guitar and amp will love it.


  • Legendary Cinemag Input and Output transformers for classic American mic pre tone
  • Hybrid-Discrete opamps receiving and driving each respective transformer section
  • Pedal friendly post effects loop. Interface with pedals at levels that won’t clip
  • High Pass Filter selectable between 80Hz and 200Hz
  • Custom 7kHz or 4kHz High Shelf filter optimized for achieving a finished tone when recording guitar
  • 20dB Pad, Phase Reverse and Phantom Power toggles
  • Premium components throughout the all Analog signal path
  • Designed and Built in Los Angeles, California U.S.A.


  • Up to 60dB of gain at the input section
  • Output trim -27dB to +12dB (occurs pre-output transformer to preserve output transformer secondary impedance)
  • 12dB / octave High-Pass: 80Hz or 200Hz corner frequency
  • High-Shelf boost: + 3dB at 4kHz or 7kHz corner frequency
  • 20Hz to 20kHz flat frequency response (+/- .3 dB) with all filters disengaged
  • -130dBu EIN (A-weighted)
  • 1Meg Ohm input impedance at Return/D.I. input
 Ships in 3-5 days

Product Videos

Meris 440 Mic Pre Tips and Tricks 03:58

Terry walks you through Tips and Tricks for everyday guitar recording duties. Watch as Angelo & Terry demonstrate: Using Delay Post Amp Recording Finished Guitar Tone High Pass Filter on a Woofy Cab Stereo Post Effects Loop Adding Sparkle to a Ribbon Mic D.I. for Instruments Interfacing Effects in a Mix Official Meris Site: http://www.meris.us Like Meris on Facebook: http://fb.com/meris.us Follow Meris on Twitter: http://twitter.com/meris_us

  • Meris 440 Mic ...
    Terry walks you through Tips and Tricks for everyday guitar re...
Calculated at checkout